Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
What you want to do
Exit the Sub-Menu
Exit the Menu
In external scheduling mode, your radiator recognizes the following pilot line orders: Comfort / Comfort -1 /
Comfort -2 / Eco.
u.
7- Load Management
Choose a load management device with a pilot line or carrier current to cut-off heating devices (based on
your contract with your electricity provider). Indeed, a power output load shedding device may damage the
devices' thermostat. During these periods, your device displays "Load Management." It then returns to its initial
operating mode.
e
8 - Factory Reset
Your device may be reset to factory conditions:
lized
- simultaneously press and hold the
hing
(Sweetcontrol models) keys.
9 - Maintenance
Before beginning maintenance, turn off the device by pressing and holding the
To maintain your radiator's performance, approximately twice a year you must dust the lower and upper grilles
on the device with a vacuum or brush.
The device may be cleaned with a damp cloth; never use abrasive agents or solvents.
A polluted appearance or smudges may appear on the device's grilles. This is related to poor air quality. In this
case, it is advisable to check correct ventilation in the room (ventilation, air intake, etc. ..). These smudges do
not qualify for guarantee replacement.
10 - Caution
nt
- In order to avoid overheating do not cover the heating device
- Do not allow children to lean against the radiator and do not allow them to play nearby when it is in operation,
as the surface may cause skin burns particularly because their reflexes have not yet been acquired or are slower
than those of an adult. To prevent risks, have a protective rail installed in front of the radiator. This device has
not been designed to be used by people (including children) whose physical, sensory, or mental capacities are
limited, or persons lacking experience or knowledge, unless they have supervision or instructions concerning
the use of the device from a person responsible for their security.
Supervise children to be sure they do not play with the device.
Do not insert objects or paper into the device.
All servicing inside the device must be performed by a qualified professional.
For any repairs, the machine must be unpowered and cooled before lifting it from its base.
431396J_maradja_international.indd 19
What you must do to achieve this
Press the
and
keys until "Back
to Menu" is displayed, press
Press the
and
keys until "Exit
Menu" is displayed.
Validate with
,
and
What happens
You are returned to the main menu.
Exit menu is displayed
The initial screen with the current
mode and chosen temperature are
displayed.
and (Standard models) or
key.
.
,
and
11/06/10 11:10
Publicidad
Tabla de contenido
