Wiseup MT-V001 Guia Del Usuario página 5

All manuals and user guides at all-guides.com
4. Setting the time and alarms
(1) Press the SET button on the camera once, the display will flash.
(2) Press the HR button on the camera to adjust the hour digits to desired value.
(3) Press the MIN button on the camera to adjust the minute digits to desired value.
(4)Press the SET button on the camera again to set the alarm.
(5) Press the HR button on the camera to adjust the hour digits to desired value.
(6) Press the MIN button on the camera to adjust the minute digits to desired value.
(7) Press the SET button on the camera the third time to get in to the final setting
mode.
(8) Press the HR button on the camera to turn the hourly chime on or off.
(9) Press the MIN button on the camera to turn the alarm on or off.
(10) Press the SET button on the camera the forth time to save and exit the setting.
Note:
1. In normal time display mode, press the HR button on the camera to switch the time display mode
between 12-hour format and 24-hour format.
2. In normal time display mode, press the MIN button on the camera to select the desired alarm ring-
tones.
3. Press the LIGHT button on the camera to momentarily turn on the backlight.