Setup Menu - Altec Lansing PT7031 Guia Del Usuario

Advanced Operation
Setting Channel (Speaker) Levels
Individual levels can be set for front, center and rear or surround
channels by using the corresponding +/– level buttons on the remote.
These levels should be adjusted so that all channels are at a similar
volume when the listener is seated using the Test Tone function as
described in the Setup Menu section that follows.
Adjustments are made by:
• Pressing LEVEL (Front +/–, Center +/– and Rear +/–) for each channel
to be set. The level of the channel will appear on the TV screen.
• The range for each level is -10 dB to +10 dB, in 1 dB steps. The initial
volume is 00 dB.

Setup Menu

The setup menu is displayed on your TV screen using the OSD. The OSD
will only work if a video connection has been established as described
in "video connection" section of this manual. You can customize your
PT7031 for language, TV type, test tone setting, screen saver, and EQ.
The setup menu can also be used to reset the unit to factory default
settings if necessary.
Displaying the On-screen Display
• Press the OSD button on the remote to display the setup menu.
• Use the buttons on the remote to toggle through the
selections.
• Highlight your desired option.
• Press the OK button on the remote to confirm your selection.
• To exit the setup menu, press the OSD button or select EXIT SETUP
from the menu.
Setting the OSD Language
Select the language for on-screen display. The default setting for the
OSD is ENGLISH.
TV Type Setting
The color system of the DVD system, DVD and TV should match. Only
then will it be possible to play a DVD on this system. Before changing
the TV system, determine the color system of your TV.
The default setting is NTSC. NTSC is used in several countries including
the United States, Canada and Japan. PAL is used in most European and
Asian countries.
AUTO: Select this if the connected TV is compatible with both NTSC
and PAL. The output format will be in accordance with the video signal
of the DVD disc.
All manuals and user guides at all-guides.com
8
NTSC: Select this if the connected TV has the NTSC color system. It
will change the video signal of a PAL disc and output it to NTSC format.
PAL: Select this setting if the connected TV has the PAL color system. It
will change the video signal of an NTSC disc and output it to PAL format.
SETUP
OSD LANG
TV TYPE
TEST TONE
SCREEN SAVER
EQ
DEFAULT
EXIT SETUP
Test Tone Setting
When set to the ON position, the system will test the speaker output
by using an internally generated test tone. The test signal is output
sequentially through various channels. The default setting is OFF.
Screen Saver Setting
When set to ON the PT7031 will automatically enter the screen saver
mode when no changes have been made after five minutes. This is
useful for preventing image burn from occurring that can damage
certain plasma TVs. The default setting is ON.
MENU
AUTO
NTSC
PAL