Set-Up - Agilent TPS-mobile Instrucciones De Uso

Instructions for Use

Set-up

Do not remove the adhesive and protective cap until you are ready to install the
CAUTION
turbopump to the system.
Figure 74
Install this device indoors only, and do not use the system in an environment
exposed to atmospheric agents (rain, ice, snow), dust, aggressive gases, or in
explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be complied with in
order to avoid condensation:
maximum ambient pressure: 2 bar above atmospheric pressure

temperature: refer to the manuals of the single TPS-mobile components

relative humidity: refer to the manuals of the single TPS-mobile components.

In the presence of magnetic fields the pumping system must be protected using a
ferromagnetic shield.
Agilent TPS-mobile User Manual 213