Agilent TPS-mobile Instrucciones De Uso página 263

Technical Information
Figure 101 RS – 485 Connection
The communication port mating connector is supplied with the RS 232 PCB
(AMP/Cannon or equivalent 15-pin "D" type male connector).
For example, the Transmit data signal from controller (pin 2) must be connected to
the host computer's receive data line (pin 2) and vice versa. Consult the host
computer's instruction manual for its serial port connections.
Agilent cannot guarantee compliance with FCC regulations for radiated emissions
NOTE
unless all external wiring is shielded, with the shield being terminated to the metal
shroud on the 0-subconnector. The cable should be secured to the connector with
screws.
Agilent TPS-mobile User Manual 263