Clock Reception; Set The Clock Manually - Explore Scientific RPW3008 Manual De Instrucciones

CLOCK

CLOCK RECEPTION

1. When you insert or replace the batteries, RCC
reception is initiated. To manually start RCC
reception press the [
2. The receiving process duration is 2-10 minutes. If
the signal is weak, it could take up to 24 hours to
receive a valid signal.
3. During receiving process, the RCC signal symbol
shows: [ ].
4. If the RCC receiving process is successful, a com-
pleted RCC symbol [ ] will be shown in the display
and the date and time will be set automatically. If it
fails within 7 minutes, RCC setting will quit automatically
If that happens, press [
RCC receiving.
5.To stop RCC reception, press and hold the
[ ] button.
6. If the device is still not receiving the signal, please
proceed to set the time manually.
] button.
] button to re-initiate
NOTE: When using a power adapter, please increase
the separation of the main unit and the power adapter
to avoid interference of RCC signal receiving.

SET THE CLOCK MANUALLY

1. Press and hold [ ] button to enter time and date
setting.
2. The setting parameter will flash.
3. Press [+] button once, the figure will increase 1 unit
(when setting minute, second will reset to 0). Press and
hold the [+] button, the figures will increase rapidly.
4. Press [–] button once, the figure will decrease 1
unit (when setting minute, second will reset to 0).
Press and hold the [–] button, the figures will
decrease rapidly.
5. Press [ ] button to confirm setting and enter to
next parameter.
6. Sequence of setting: Zone
Minute Year Calendar format (month-day/
day-month) Month
(°C/°F) Weekday Language
7. If there is no action in 20 seconds or if you press and
12/24h format Hour
Date Temperature unit
9
EN
IT
DE
FR
ES
NL