Clean And Basic Maintenance - Ducati CORSE E-MOTO Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 57
10. Clean & basic maintenance
DANGER!
Adjust brake system at your own risk. If you have any doubt of faluty adjustment, contact
your local dealer.
Please contact your local dealer if your brakes are not performing properly or are worn out
abnormally.
Brake
brake pads
WARNING!
Check the tyre tread & pressure before each ride. Inflate the tyre to indicated pressure
to ensure that the tyre works properly.Carefully inspect the tread of the tyre.If there are
bulges, cracks, cuts, pegs and abnormal tyre wear on the surface of the tyre, replace tyre
immediately. Use a tyre pressure gauge to check if the tyre pressure is normal. Please
refer to the tyre indication located on the tyre side wall.Avoid direct sunlight, oil, fire and
other heat sources. UV, corrosive chemicals, and other rubber sensitive substance can
damage the lifespan and integrity of the tyre.
Tyres
19Nm
39Nm
Battery
The battery pack is maintenance-free device. Do not disassemble or modify the battery
pack in any circumstances. Use only certified origional battery.Connectors must be clean
and rust-free. The connectors have coating to protect terminals from rusting; if scratch
by foreign object or store in high humidity environment can cause rust and damage the
battery. Check for clean and rust-free terminals before and after every ride.
Basic clean
Always disconnect the product from the charger first, turn off the power of the product,
and avoid fluid contact with the battery, motor and other electronic parts during cleaning
to avoid unforeseen hazard. Do not use a high pressure water jet to clean the product or
soak it in water. Do not use thinner or other solvents to clean the product.
22

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido