Miele FRZ01 Manual Del Usuario página 4

M.-Nr. 06258813
en
Installation instructions for flow meter FRZ01/APWM065
Purpose: the installation kit is required for installing a flow meter in a washing machine.
Included parts
No. Mat. no. Designation
1 Flow meter
1 Water inlet adapter
2 Sealing washer
1 White sticker
3 Cable tie
1 Cable gland
1 Wiring diagram, MF07
1 Wiring diagram, PW6107 – PW6207, module 7
1 Wiring diagram, PW8xx/4xx, MF07 – FRZ
Danger due to incorrect service and repair work
WARNING

Danger due to incorrect service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety requirements must be taken into account.
A
Wear personal protective equipment.
A
First read the Miele service documentation, then commence work.
A
Ensure that no people or animals can access the work area while service work is being carried out.
Risk of injury due to sharp edges
WARNING

Some components may have sharp edges.
Risk of injury due to sharp edges
A
Protective gloves should be worn and the edge protection (mat. no. 05057680) should be used.
Installing the FRZ01/APWM065 flow meter
PW6101, PW6131, PW6161, PW6201, PW6107, PW6137, PW6167, PW6207, PW413, PW418, PW811, PW814,
PW818
The flow meter can only be installed if the MF7 multifunction module is already installed and registered in the washing
machine.
PW6163, PW6243, PW6323
The flow meter can only be installed if the "BSF-RU flow meter clean/unclean side" kit is already installed in the
washing machine.
PWM912, PWM514, PWM916, PWM520, PWM920
The flow meter can only be installed if a Connector Box is already installed and registered.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
4 von 27
08.12.2021