Sharp SD-WH1000U Manual De Manejo página 69

Specifications
WiHD Transmitter unit
Terminals HDMI IN
DC 5V IN
DC IN
WiHD Receiver unit
Power consumption (Normal)
Terminals HDMI OUT
DC 12V IN
AC Adaptor WiHD Receiver unit
Power requirements
Rated output
WiHD Transmitter/Receiver unit
Wireless System Standard
Transfer mode
Center Frequency 60.48GHz (CH2) / 62.64GHz (CH3)
Band width
Transfer power
Wireless LAN (Internal antenna)
Standard
Frequency band
Modulation
Transport power and Tx output power:
sensitivity (Typical)
Rx sensitivity:
(Typical)
Security
WiSA compliant Wireless Audio Transmitter (Internal antenna)
Frequency band
Band width
Transport power
HDMI (HDMI input)
DC 5V INPUT with Wired
DC 5V INPUT
3 W
HDMI (HDMI output)
DC 12V INPUT
AC 120V, 60Hz
DC 12V, 1A OUTPUT for WiHD Receiver
WirelessHD 1.1
HRP (AV Streaming transfer) / LRP (Control/CEC transfer)
1.76GHz
10mW
IEEE802.11a/b/g/n
2400-2483MHz, 5150-5850MHz
DBPSK @ 1Mbps
DQPSK@ 2Mbps
CCK@ 5.5/11 Mbps
BPSK@ 6/9 Mbps
QPSK@ 12/18Mbps
16-QAM@ 24/36 Mbps
64-QAM@ 48/54 Mbps and above, Rx up to 300Mbps
2.4GHz
11b 15±2dBm
11g 15±2dBm
11n 15±2dBm (HT20)
5GHz
11a 13±2dBm
11n 13±2dBm (HT20)
-89 dBm @11 Mbps
-72 dBm @54 Mbps
-70 dBm @64-QAM, 20MHz channel spacing
-67 dBm @64-QAM, 40MHz channel spacing
AP (Infrastructure) mode supports
- Static WEP that support both 64 and 128 bit keys.
- WPA/WPA2-PSK(TKIP)
- WPA/WPA2-PSK(AES)
5150-5850MHz
20MHz
13dBm (Typical), 15dBm (Maximum)
vii