Putting The Pool Cleaner Into The Pool; Removing The Pool Cleaner From The Pool - Dolphin WAVE 100 Instrucciones De Manejo

5.2. Putting the Pool Cleaner into the pool

If the foam climbing rings on the brushes are dry soak them in water until soft.
Shake the robot from side to side or turn
it upside down to release trapped air.
Let it sink to the pool floor.
ON
Turn the power supply ON.

5.3. Removing the Pool Cleaner from the pool

The robot will perform automatic shut-off at the end of the cleaning cycle.
OFF
Turn OFF and unplug the power supply.
CAUTION
Dolphin WAVE 100 Pool Cleaner | Operating Instructions
5
8151637_Book.indb 5 29/12/2013 9:59 AM