Using The Low-Light Assist Lamp; Changing The Movie Size - Coby Snapp CAM4002 Manual De Instrucciones

The magnification level is displayed on the
lower right of the screen.

Using the Low-Light Assist Lamp

The low-light assist lamp may help to increase
photo or movie quality in dark environments where
proper lighting is not possible. For best results,
subjects should be well lit. The assist lamp cannot
substitute for proper lighting.
Press to turn the lamp on or off.

Using the low-light assist lamp will decrease
battery life.

Changing the Movie Size

The camera can record at a maximum movie size
of 640 x 480 pixels. To increase recording time, you
may wish to record movies at a lower resolution.
The movie size is displayed on the upper right of
the screen.
Page 12
All manuals and user guides at all-guides.com
Movie Size
[640]
[320]
To change the movie size:
1. Press to access the options menu.
to select the Movie Size option and
2. Press
then press .
3. Press or to select a movie size. Press the
joystick to set the movie size.
4. Press to exit the options menu.
Recording must be stopped to change the
movie size.
Record Mode (photos & Movies)
Resolution
VGA (640 x 480)
QVGA (320 x 240)