Part List - ultega 831100000017 Manual De Instrucciones

PART LIST

No. Desctiption
01 Shape Frame
02 D Shape Handle
03 Head Rest
04 Plastic Connector with Screw
05 Screw
ASSEMBLY STEP
Step 01
• Fix the seat in the centre of the top rod aligning the two holes on the seat with the holes in the
Rod and push the two long bolts from the back of the top rod into the back of the seat.
Step 02
• Place a fitting on both top ends of arm rests & align the screw of each fitting with the respective
holes in the arm rests. Now push both top ends of arm rests into the ends of the top rod.
Step 03
• Place a fitting on both ends of the bottom rod & align the screw of each fitting with the respective
hole. Push the bottom ends of the arm rests onto the ends of the bottom rod.
Step 04
• Tighten all fitting screws.
• This equipment is now ready for use & is easily
stored after use.
Recheck
all bolts and nuts are
tightened securely
before use the machine
www.ultega.net
4
2
4
Q'ty
2
2
1
4 set
2
1
4
5
3
5