Tripp-Lite B110-SP-CAT-OD2 Guia De Inicio Rapido página 5

Protecting Edge-Of-Network Equipment
This installation protects your edge equipment from surge,
lightning or ESD damage. To protect both the source and edge
equipment, refer to section Protecting Edge-Of-Network
Source and Equipment in this guide.
Note: Use standard size Cat5e, Cat6 or Cat6a cables that feature a
wire gauge of 23/24 AWG. Slim category cables are not supported.
1. Remove both the cap
2. Slide the cap and remaining portion of the cable gland onto
Note: Use standard Cat5e, Cat6 or Cat6a cables with a wire gauge
of 23/24 AWG. Slim category cables are not supported.
21-02-277-933D64-Book.indb 5 21-02-277-933D64-Book.indb 5
Installation
cable glands (refer to section Cable Gland Assembly).
both the included grounding wire and bare-wire category
cable coming from your source (ex: PoE switch) as shown:
A E
and end nut
5
from one of the
7/27/2021 11:40:29 AM 7/27/2021 11:40:29 AM