Tripp-Lite B110-SP-CAT-OD2 Guia De Inicio Rapido página 7

4. Screw the metric cable gland to the enclosure using the
5. Using a punch down tool (such as Tripp Lite's N046-000,
6. Repeat Steps 1-3 for the equipment (ex: PoE camera) side
Note: To achieve the best protection performance, the Cat5e/6/6a
patch cable between the equipment end of the B110-SP-CAT-OD
surge protector and the equipment to be protected must not exceed
300 ft. (100 m).
21-02-277-933D64-Book.indb 7 21-02-277-933D64-Book.indb 7
Installation
D
end nut previously removed in step 1. Then, tighten the
cap securely onto the cable gland.
sold separately), connect the bare wire to the color-coded
board inside the enclosure.
of the enclosure without the addition of a grounding wire.
7
7/27/2021 11:40:29 AM 7/27/2021 11:40:29 AM