Uline H-5946 Guia De Inicio Rapido página 2

3. Attach a seat assembly to the X-brace using 2⁄"
hex bolts. Secure using lock washers and hex nuts
on the inside of the brace. The X-brace should be
positioned with the holes on the top. Repeat on
opposite side of the X-brace. (See Figure 3)
4. Attach an L bracket to the
outside of each of the legs with
the flange pointing towards the outside of the table
using a 2⁄" hex bolt. Secure using a flat washer,
lock washer and hex nut. (See Figure 4).
NOTE: The bolt should be positioned so that the
bolt head is on the inside of the L bracket.
PAGE 2 OF 6
ASSEMBLY CONTINUED
5. With two people, lift and place the tabletop onto
the legs with the support braces on the inside of the
legs so that the predrilled holes are aligned with the
holes in the L brackets. (See Figure 5)
Figure 3
6. Slide the remaining two leg assemblies into place
on the insides of the tabletop support braces
(See Figure 6).
7. Secure tops of legs to the tabletop and L brackets
using a 3" hex bolt secured with a flat washer, lock
washer and hex nut. (See Figure 6)
Figure 4
8. Attach the bottoms of the legs to the X-Brace using
2⁄" hex bolts. Secure using a lock washer and hex
nut.
1-800-295-5510
uline.com
Figure 5
Figure 6
0721 IH-5946