Clarke Technology ALTO FILTRA-VAC 14 Libro De Instrucciones página 18

Figure 12
Figure 13
Page 18
All manuals and user guides at all-guides.com
CLARKE TECHNOLOGY
5. Install the tool holder on the handle tube. To
install the tool holder, follow this procedure:
a. Put the tool holder in position around the
handle tube.
b. Put the crevice tool and the upholstery tool in
the tool holder. See figure 12.
6. Put the wand adapter in the larger end of the
wand.
7. Put the hose adapter into the opening in the back
of the tank housing (1). See figure 13.
8. Put the end of the wand in the back of the tank
housing (2). See figure 13.
9. Push the wand assembly forward until it locks in
position (3). See figure 13.
10. Put the vacuum hose over the hook on the handle
assembly (4). See figure 13.
11. Put the power cord around the cord storage hooks
(5). See figure 13.
Filtra-Vac 14 and 18 Operator's Manual