Adjusting The Harness Height - Baby auto LOLO 01 Manual De Instrucciones

5. Take up the remaining slack of the diagonal section of the 3-point
seat belt and make sure it is as tight fitting as possible. Ensure the
straps are not twisted or knotted at any point (fig. 3.6).
4. Fastening the child in the seat. groUP 0+
Proper adjustment of the height of the harness ensures the child
will be seated correctly. The harness should be adjusted to the
height of the child's shoulder or slightly above; never behind the
child's back or level with the ears (fig. 5.1).
1. Loosen the harness straps by pulling them gently while pressing
the harness adjustment button
2. Release the buckle
5.2).
3. Place the child in the seat.
4. Secure the child in the harness by joining the two parts
of the clasp and fastening the buckle
click (fig. 4.3).
5. Gently pull the harness adjustment strap to achieve the correct
(F)
tension . Remember that in order to ensure the child's safety
the harnesses should fit tightly (fig. 4.4).

5. adJUsting the harness height

1. Loosen the harness straps by pulling them gently while pressing
the harness adjustment button
2. Loosen the harness straps from the back of the seat, freeing
them from the harness connector
3. Pull the harness straps from the front to free them from the seat
back.
4. Reinsert the harness straps at the desired height using fig. 5.1 as a
guide.
5. Reinsert the harness straps in the connector on the
back of the seat.
(e)
(d)
to make it easier to seat the child (fig.
(e)
.
(i)
.
(d)
until you hear a
(fig.5.2).
23