Connecting The Device Master Data File To The Software - Aventics PROFIBUS DP Instrucciones De Servicio

AVENTICS | PROFIBUS DP | R412009414-BDL-001-AE
O
Configure the bus system in accordance with your system
requirements, the specifications in the device master data files,
the manufacturer's specifications, and all valid technical
standards, directives, and safety regulations. Take the
operator's documentation on configuring the bus master into
account.
The configuration may also be carried out using other
configuration software, but the described parameters and
settings must be adhered to.
7.2.1 Connecting the device master data file to the
software
The device master data file GSD includes the performance
characteristics of the DP slaves or DP master. The device
master data is standardized in accordance with EN 50170,
Part 2, PROFIBUS. In this way, DP components from different
manufacturers can be implemented using one planning
software.
Each valve system is equipped with valves as ordered and must
now be configured as a DP slave; this example uses the
IndraWorks program (Rexroth).
The configuration can also be done using tools from other
manufacturers.
Due to the differences in software structure, die device
master data (GSD) file and the *.dib files must always be
copied into the respective directory.
The software IndraWorks includes all current AVENTICS
GSD files which were available when the software version
was generated.
The GSD file can be downloaded from the Internet at
www.aventics.com.
If the device master data (GSD) file is not included in your
version of IndraWorks, you need to import it:
Commissioning/Operation
77