Removing Internal Battery - Tripp-Lite BP192V12RT3US Manual Del Usuario

Removing Internal Battery

Before mounting the battery pack to a 4-post or 2-post rack, first remove the battery trays and set them aside. To remove
the batteries from the battery pack, follow the instructions below.
1
Remove the six front screws from the front
bezel and remove the bezel from the battery
pack frame.
2
Remove the six screws from the battery
bracket and remove the battery bracket from
the battery pack frame. Disconnect the
communications cable from each battery tray.
3
Use the handles attached to each battery
pack tray to remove the battery pack trays in
the order shown.
Note: Make sure to move the communication
cables out of the way of the battery trays
accordingly.
1
2
2
1
3
3
4
3