OHAUS Valor 1000 Manual De Instrucciones página 6

EN-4
3 COMMUNICATION – RS232
3.1 Setup
The OHAUS Interface is preset to communicate using the following settings: 9600
baud, 8 bit, no parity, no handshake. Determine the RS232 parameters with PC
that is to be connected.
Upon installation of the interface, the scale will recognize the RS232 Interface and
show relevant items in the user menu.
MENU ITEM
Reset
Baud Rate
Parity
Stop bit
Handshake
FMT
Stable
A.Print
End
3.2 Connection
The RS232 Interface Kit cable terminates with a 3 pin Sub-D female connector.
Active pins: Pin 1 = Ground, Pin 2 = RXD, Pin 3 = TXD
The Interface connector will connect directly to a PC.
DISPLAY DEFINITIONS
reset
no, yes
NO, Yes
BaUd
600, 1200, 2400, 4800, 9600, 19200
600,1200,2400,4800,9 9 600,19200
Parity
7-even, 7-odd, 7-none, 8-none
7-EuEn, 7-Odd, 7-none, 8 8 -none
Stop 1, 2
Note Parity=7-none,Stop bit=2
1, 2
H.shake None, Xon-Xoff
none, OnOff
FmMt 0FMT, 1FMT, 2FMT
OFmMt, 1FmMt, 2FmMt
Stab
Off, on
Off: print stable and unstable value
on: only print stable value
A.Print
Off, SLP, SLZP, Cont, Inter
Off,SLP,SLZP,Cont,INter
Off: auto print is off, default setting
SLP: print stable value only incl. load point
(w/o zero point), delta value>=5d
SLZP: print stable value incl. load or zero
point, delta value>=5d
Cont: continues print
Inter: interval print, default 1 sec.
1,5,15,30,60s (Optional)
end