Oleo-Mac PW 125 C Manual Del Usuario página 19

• WARNING: Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
• When carrying out the filling/topping-up of the detergent tank, take care not to spill the liquid
onto the machine. If this should happen, wait for at least 24 hours before using the machine, so
that the liquid that may have penetrated inside the equipment has time to evaporate.
• WARNING: During use of high pressure cleaners, aerosols may be formed. Inhalation of aerosols
can be hazardous to health.
• During use:
- In case the identification plate or warning signs are worn or not-legible, please contact a
QUALIFIED TECHNICIAN
- Watch over the machine at all times and out of the reach of children; in particular, take great
care when used at nursery schools, nursing homes and retirement homes, because unguarded
children, elderly or disabled people may be present in these locations;
- Grip the gun firmly because when the lever is pulled you are subjected to the reaction force of
the high-pressure jet; the value of this recoil force is indicated in the technical specifications
table (the recoil force is expressed in N, where 1 N = 0.1 Kg);
- Do not direct the water jet towards materials containing asbestos or other substances detrimental
to health;
- Do not block the lever of the gun into the always on position;
- Do not cover the machine and do not position it in an unventilated environment (remember
this especially when using the machine indoors);
- Remember that when the machine is in Total Stop it is actually still on, therefore the safety catch
on the lever of the gun should be in the blocked position, so as to avoid accidental activation;
- Do not leave the machine unattended in Total Stop, even for a short time: if so, place the master
switch in the "0" position, remove the plug from the power socket and press the lever of the
gun to release any residual pressure;
- When not in use, carry out the operations described in paragraph
leave the machine with the plug connected in the power socket;
- The operating pressure must never exceed the maximum value foreseen for the machine (see
also paragraph
"TECHNICAL CHARACTERISTICS AND SPECIFICATIONS"
- Always position the master switch to "0" and remove the plug from the power socket if an
automatic reset thermal or amperometric safety device is activated, because the machine could
spontaneously turn on again after it has cooled;
- If a safety device is repeatedly activated, absolutely do not use the machine without having it
previously checked by a
- Use suitable personal protection equipment against the noise emitted (e.g. protective ear muffs).
• WARNING. High pressure jets can be dangerous if subject to misuse. The jet must not be directed
at persons, live electrical equipment or the machine itself.
• If you use water jetters, insert hose to red mark before turning on the machine.
• WARNING. This machine has been designed for use with the cleaning agent supplied or
recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely
affect the safety of the machine.
• WARNING. Risk of explosion - Do not spray flammable liquids.
for its substitution.
QUALIFIED TECHNICIAN
"STOP"
;
, in particular, never
);
GB
19