UPS 600VA – User's Manual
Package contents (Package contents)
On/Off button
Red
Status LEDs:
Yellow
Green
AC input cable
Fuse holder
Output
Loop through cables (2x)
Installation (Installation)
-
Turn off your computer.
Use loop through cables (
) to connect the computer and its monitor to the UPS backup outputs
-
(
).
-
Turn on the UPS.
-
Charge the UPS for 8 hours.
-
The equipment connected to the UPS can be switched on.
Replacing the fuse (Replacing the fuse)
-
Make sure the UPS is completely off, (disconnect mains power).
-
Use a spare fuse of same rating (250V, 5A)!
-
Open the fuse holder (
).
-
Replace the fuse and close the fuse holder.
2