Fitting The Metric Bar - MAHLE Digital ADAS 2.0 Manual De Instalación

7.6

Fitting the metric bar

For easier installation of the metric
bar, raise the structure to the max-
imum, using the special remote
control.
To lift the structure, the power plug
must be connected to the mains.
Do not keep the magnetic strip in
contact with magnetic elements.
Danger of demagnetization!
No. 2 operators are required to mount the metric
bar.
Tools needed:
Phillips screwdriver
n
10 mm socket wrench
n
Tightening torque: 10 Nm
Bar Pre-Assembly
1 Perform assembly operations on a
clean, stable surface
2 Insert the centering bar in one half
of the metric bar and fix it with the
appropriate screws (TSPEI M6x20)
3 Place the second half of the metric
bar on the centering bar and secure
it with the appropriate screws (TSPEI
M6x20)
4 Close one of the ends by refitting the
plate and tightening the fixing screws
21