AQUAJOE AJYP100 Manual Del Usuario página 4

3. Follow (Fig. 2) to assemble your pest
deterrent sprinkler. These fittings should
only be hand tightened. No tools are
required.
Fig. 2
Sprinkler head
Sprinkler
connector
Post
Step spike
4. Connect your standard garden hose to
the hose-end connector, or use a quick-
connect hose with the provided quick
connector instead (Fig. 3). Then aim the
sensor lens towards the area you wish to
protect.
Fig. 3
5. Drive the step spike into soft terrain such
m
Sensor
housing
sensor housing or sprinkler head. If the ground
is too hard or unsuitable for the ABS plastic step
spike, try placing the sprinkler in a flower pot
filled with a weighted material like sand or gravel.
Daisy-Chaining
If you have more than one pest deterrent
sprinkler you can daisy-chain them up in
series by removing the flow-through cap and
connecting them together with a hose (Fig. 4).
Fig. 4
Sticker Sheet (optional)
As an extra deterrent, apply the optional predator
stickers onto the sensor housing (Fig. 5).
Fig. 5
4
as soil, gravel or sand by putting your body
weight onto the foot pedal.
FRAGILE!
Do not push down on the
Quick-connector
Quick-connect
Garden Hose