AQUAJOE AJYP100 Manual Del Usuario página 5

Operation
Detection Modes
To avoid getting wet, you can calibrate your
desired detection mode without turning on the
water as long as you can hear the activation click
from 33 ft. (10 m) away.
1. Set the desired detection mode using the
Detection + sprinkler mode dial (Fig. 6)
based on the chart below.
Mode Distance
10 – 16 ft. (3 – 5 m)
26 – 33 ft. (8 – 10 m)
33 – 39 ft. (10 – 12 m)
Fig. 6
Detection
Modes
2. The pest deterrent sprinkler has a field of
view of 120º. Position the motion sensor
lens based on your desired coverage area
(Fig. 7).
Fig. 7
Sprinkler Modes
To use your pest deterrent sprinkler as a regular
sprinkler you can set 10/20/30 minute auto-spray
timers, after which it will stop (Fig. 6).
Animals
Large
Large/Medium
All
Auto-spray
timers
120˚
Activation Modes
The pest deterrent sprinkler has 4 activation
modes: - Off, - Always on,
- Night time (Fig. 8).
Fig. 8
Always
On
NOTE: The pest deterrent sprinkler automatically
reduces it's sensitivity after 5 minutes in order to
preserve battery life. To minimize false triggers,
avoid pointing it towards moving objects, windy
areas or very large areas.
Water Coverage
NOTE: Turn the water on and test from behind
unless you want to get wet!
After setting up and positioning your pest
deterrent sprinkler you may wish to adjust the
rotation, distance and arc of the sprinkler.
1. Position the trip lever towards the area you
wish to protect. Turn the friction collars on
either side of the trip lever to control the
sprinkler's angle of rotation, between
0º – 300º (Fig. 9).
Fig. 9
Friction collars
Narrow rotation
5
- Day time and
Day time
Night
Off
Trip lever
Wide rotation
time