Behringer EUROLIGHT LED DSL1 Guia De Inicio Rapido página 15

28
LED DERBY DSL1
Display
(1) (2) (3) (4)
(5) (6) (7) (8)
Display Functions
Press the MENU button to access menu options, keep pressing MENU to toggle menu items. Press the ENTER button to access desired
functions and the display will flash, then use the UP/DOWN buttons to navigate and select the desire setting. Press ENTER to save and
confirm, or press MENU to go back without saving.
The main functions are as follows:
Item No. Silkscreen Function
Activates main menu and toggles
1 MENU between menu items. Closes an
open submenu without saving
Decreases the displayed value by
2 DOWN
one/ Navigate function
Button:
Increases the displayed value
3 UP
by one/ Navigate function
Enter selected function/
4 ENTER
Confirm and save
5 DMX Flashes when in DMX mode
6 MASTER Flashes when in MASTER Mode
LED:
7 SLAVE Flashes when in SLAVE Mode
Flashes when in
8 SOUND
Sound Active Mode
Menu Options and Settings Description
Addr A001-512 UP/Down to select from address 1 to 512
ChAn 2Ch/6Ch DMX Channel selection 2/ 6 Channel mode
MASL MASt Activate MASTER (HOST) mode option
SLAv Activate SLAVE mode: when connected to DMX input, slave unit will replicate the master
(HOST) unit
Auto AutM-AutS AutM Activate Auto mode for derby and stobe automatic show
Autd Activate Auto mode for derby automatic show
AutS Activate Auto mode for strobe automatic show
SPEd SP01-99 Select SP01 Min speed, SP99 Max speed
Stro St- St01-20 Activate strobe show mode. Select from 20 preset shows ST01-20
Sped SP01-99 Show speed select SP01 Min speed, SP99 Max speed
dErb dIM d000-100 Derby manual mode select dimmer brightness from 0 = off, 100 = max
r r000-r255 Derby manual mode select Red LED brightness from 0 = off, 255 = max
G G000-G255 Derby manual mode select Green LED brightness from 0 = off, 255 = max
b b000-b255 Derby manual mode select Blue LED brightness from 0 = off, 255 = max
U U000-U255 Derby manual mode select White LED brightness from 0 = off, 255 = max
Stro FS00-99 Derby manual mode select strobe frequency from FS00 = off, FS99= max strobe speed
rot rt00-rt99 Derby manual mode select light rotation speed rt00 = off, rt99=max speed
SoUn on Turn SOUND CONTROL ON. The AUTO and Show mode will follow the rhythm of the music
oFF Turn SOUND CONTROL mode OFF
Sens S001-100 Select sound sensitivity of SOUND mode from low to 100 high
bLnD no when DMX signal is interrupted, it will go back to last selected mode
YES when DMX signal is interrupted, it will black out
Led on The led display is always ON
oFF The led display will turn off after 5-10 seconds. Touch any key to turn it back ON
Disp dISP The led display in forward direction
dSIP The led display rotate 180 degree
tESt tESt Press ENTER to start test mode, light will perform routine test
FhrS Press enter to show fixture run time
vEr Press enter to show software version
rSt no Default
YES Restart fixture
29
Quick Start Guide