Beninca RR.1WBV Manual Del Usuario página 10

Mode LED Function
0 Off No function
Press the button P
1 Red Memorise channel 1
Press within 3 secs the button P
Memorise channel 2 (only for
2 Green
dual channel receivers "RR.2")
Press within 3 secs the button P
Memorise automatically
channels 1 and 2
3 Orange
(only for dual channel receivers
"RR.2")
Press within 3 secs the button P
Red
4 Set channel 1 times
Blinking
Press within 3 secs the button P
Set channel 2 times
Green
5 (only for dual channel receivers
Blinking
"RR.2")
Press within 3 secs the button P
0 LED Off No function
10
TABLE 1
Operations
Normal status.
The red LED will light up, wait 3 secs, the LED will go out and light up again,
press within 5 secs the button on the transmitter to associate with channel 1.*
The green LED will light up, wait 3 secs, the LED will go out and light up
again, press within 5 secs the button of the transmitter to associate with
channel 2.*
The orange LED will light up, wait 3 secs, the LED will go out and light up
again, press within 5 secs any button on the transmitter.
Button 1 will be associated with channel 1, button 2 with channel 2.*Il tasto 1
verrà associato al canale 1, il tasto 2 verrà associato al canale 2.*
The LED will give 5 rapid blinks. If button P is pressed during these 5 blinks
the next mode is entered. After the 5 rapid blinks the Times menu is entered.
See section "Times Mode"
The LED will give 5 rapid blinks. If button P is pressed during these 5 blinks
the next mode is entered. After the 5 rapid blinks the Times menu is entered.
See section "Times Mode"
Normal status.