Zwilling ENFINIGY 53104-6 Manual De Instrucciones página 12

Safety
kinked or pinched and make sure that
the power cord and the appliance do
not come in contact with sources of
heat (e.g. hobs, gas flames).
When unplugging the power plug
from the socket, always unplug the
power plug directly. Do not carry the
appliance by the power cord.
Never touch the power plug with wet
hands.
Do not insert any objects into the
openings on the appliance.
Never unscrew the appliance and do
not make any technical modifications.
As long as the power plug is plugged
in, there is a voltage inside the ap-
pliance, even if the appliance is
switched off.
After every use and in the event of
danger or a defect, unplug the power
plug from the socket immediately.
For this reason, keep the socket into
which the appliance's power plug is
plugged easily accessible at all times.
(Unplug the appliance from the socket
prior to assembly, disassembly and
cleaning or maintenance.)
Switch off the appliance and dis-
connect from supply before changing
accessories or approaching parts that
12
move in use.
Do not immerse the device in water or
other liquids.
A faulty appliance can lead to proper-
ty damage and injury:
Check the appliance for damage
prior to each use. If you detect any
transport damage, contact the deal-
er from whom you purchased the
appliance immediately. Never use a
faulty appliance or faulty accessories.
Never operate an appliance or ac-
cessories that have been dropped.
(The appliance needs to be repaired
in the event of a fault or a damaged
power cord. The appliance does not
contain any parts that you are able to
repair yourself.)
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Damage may occur if the appliance
is handled incorrectly.
Place the appliance on a dry, level
and non-slip surface.
Do not place the appliance on a
hot surface or in the vicinity of strong
sources of heat.
Do not let the power cord hang down.
EN