Connections - Axxess AXTO-TY1 Instrucciones De Instalación

APPLICATIONS
LEXUS
ES Series 2007-2012
ES Series (w/ multi disc) 2002-2006
GS Series 2001-2005
IS Series 2002-2005
LS Series 2001-2006
RX Series 2004-2009
SC Series 2002-2010
TOYOTA
4-Runner 2003-2013
Avalon 2005-2010
Avalon 2011-2012
(Camry) Solara 2004-2008
Camry (w/o nav) 2012-2013
Camry 2007-2011
Corolla 2003-2011
2
TOYOTA (Cont.)
FJ Cruiser 2011-2014
Highlander 2008-2013
Highlander Hybrid 2008-2012
Matrix 2005-2012
Prius 3rd Gen (w/o nav) 2012-2015
Plug-In (PHV) (w/o nav) 2012-2015
Prius 2004-2011
Rav-4 2004-2014.5
Sequoia 2005-2012
Sequoia (w/o nav)
Sienna 2004-2014
Tacoma 2005-2013
Tundra 2006-2013
Tundra (Double Cab) 2004-2005
Venza (w/ SD card based nav) 2013-2014
Venza 2009-2012
From the 16-pin harness with stripped leads to the aftermarket radio, connect as indicated:
• White wire to the left front (+) speaker output.
• White/Black wire to the left front (-) speaker output.
• Gray wire to the right front (+) speaker output.
• Gray/Black wire to the right front (-) speaker output.
• Green wire to the radio's left rear (+) speaker output.
• Green/Black wire to the radio's left rear (-) speaker output.
• Purple wire to the radio's right rear (+) speaker output.
2013
• Purple/Black wire to the radio's right rear (-) speaker output.
• Blue/White wire to the amplifier turn on wire.
Note: This wire must be connected to hear sound from the factory amplifier.
• Tape off and disregard the following (6) wires, they will not be used in this application:
Red, Brown, Light Green, Blue/Pink, Green/Purple, Orange/White

CONNECTIONS

Continued on the next page