The Pause And Pour Feature; Using The Automatic Brew Timer - KitchenAid JAVASTUDIO KCM515 Instrucciones

Operating Your Coffee Maker
6. Shake the brew basket slightly to even
out the bed of coffee. Place the basket
into the Coffee Maker, push it down
to seat it securely. Be sure the front lid
is fully closed before brewing.
7. Press the On/Off Button to begin
brewing coffee. If you are only
brewing 1 to 4 cups of coffee, press
the 1-4 Cup Button immediately after
pressing the On/Off Button. The 1 to
4 cup brew cycle ensures optimum
flavor when brewing small pots
of coffee.
NOTE: Lifting the front lid while coffee is
brewing will interrupt the brew process
and impair flavor.
8. The Coffee Maker will sound the end-
of-brewing tone when brewing is
complete.
9. The "Time Since Brew" display
indicates the time elapsed since the
completion of the brewing cycle.
10. At the end of 2 hours, the Coffee
Maker will automatically shut off. To
turn off the Coffee Maker manually,
press the On/Off button. The outside of
the carafe may be warm to the touch
after brewing. Use discretion when
placing the carafe on unprotected
surfaces immediately after brewing.
11. Repeat steps 1-8 to brew additional
carafes of coffee. Always turn off the
Coffee Maker and allow it to cool for
five minutes before starting the next
brew cycle.
All manuals and user guides at all-guides.com
10

THE PAUSE AND POUR FEATURE

The pause and pour feature enables you
to remove the carafe from the Coffee
Maker and pour a cup of coffee before
brewing is finished. When the carafe is
removed, a special valve stops the flow
of coffee from the brew basket. Brewing,
however, does not stop. If the carafe
is not placed back on the Carafe Tray
within 25 seconds, water and coffee will
overflow the brew basket.

USING THE AUTOMATIC BREW TIMER

The Coffee Maker can be programmed
to brew coffee at a preset time, making
it easy to wake up to fresh coffee every
morning.
To program and activate the automatic
brew timer:
1. Press the Set (Program) Button. The
brew timer display and Set (Program)
indicator will begin to flash. The brew
timer display will show the last brew
time set.
2. Press the "H" (hour) and "M" (minute)
Buttons below the brew timer display
to set the hour and minutes. If a "H"
or "M" Button is pressed and held,
the digits will scroll rapidly. The AM
and PM indicator lights on the brew
timer display will change when the
hour digits roll past "12". Make sure
the desired brew time is correct with
respect to AM or PM.
"H" and "M"
Buttons