Publicidad
Enlaces rápidos
DMS6-PC-R
Installation Instructions
Door Mounted Tray System
Minimum Opening:
Included:
1. Cut out the below mounting
template and use it to mark the
2 holes for the top of the vertical
supports.
¾" Screw (x8)
Basket (x2)
2. Screw in top of vertical supports
into the door using marked
holes. Do not screw in bottom of
supports.
Vertical
Tools Needed:
Support (x2)
Phillips Screw Driver
Tape Measure
(optional)
3. Place baskets into vertical supports
at desired positions. Baskets can
be repositioned later.
10 ¾" [272.5mm]
4. Screw in bottom of vertical
supports while baskets are
attached. For more support, use
additional screws as needed.
Publicidad
Resumen de contenidos para HARDWARE RESOURCES DMS6-PC-R
- Página 1 DMS6-PC-R Installation Instructions Door Mounted Tray System Vertical Minimum Opening: Included: Tools Needed: Support (x2) ¾” Screw (x8) Phillips Screw Driver Basket (x2) Tape Measure (optional) 1. Cut out the below mounting 2. Screw in top of vertical supports 3. Place baskets into vertical supports 4.
- Página 2 ESP: Instrucciones de instalacion DMS6-PC-R Sistema de la bandeja de montaje en puerta FR: Instructions d’installation Système de plateau à montage sur porte ESP: Abertura mínima ESP: Incluido ESP: Herramientas necesarias Rieles (x2) FR: Ouverture minimale FR: Inclus FR: Outils nécessaires Coulisses (x2) ¾”...