Maintenance And Cleaning; Stainless Steel - Viesta VDI90230EG Manual Del Usuario

CAUTION
Before maintenance or cleaning is carried out, the cooker hood should be disconnected from the
main power supply. Ensure that the cooker hood is switched off at the wall socket and the plug
removed.
External surfaces are susceptible to scratches and abrasions, so please follow the cleaning instruc-
tions to ensure the best possible result is achieved without damage.
GENERAL
Cleaning and maintenance should be carried out with the appliance cold especially when cleaning.Avoid
leaving alkaline or acid substances (lemon juice, vinegar etc.) on the surfaces.

STAINLESS STEEL

The stainless steel must be cleaned regularly (e.g.weekly) to ensure long life expectancy.Dry with a clean
soft cloth. A specialized stainless steel cleaning fluid may be used.
NOTE:
Ensure that wiping is done along with the grain of the stainless steel to prevent any unsightly crisscross
scratching patterns from appearing.
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean and well wrung
before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning.
IMPORTANT
Using neutral detergents and avoid using harsh cleaning chemicals, strong household detergents or
products containing abrasives,as this will affect the appliance appearance and potentially remove any
printing of artwork on the control panel and will void manufactures warrantee
GREASE MESH FILTERS
The mesh filters can be cleaned by hand. Soak them for about 3 minute in water with a grease-loosening
detergent then brush it gently with a soft brush. Please do not apply too much pressure, avoid to damage
it . (Leave to dry naturally out of direct sun light)
Filters should be washed separately to crockery and kitchen utensils. it is advisable not to use rinse aid.

MAINTENANCE AND CLEANING

[ EN ● 11 ]
Version: 2:0
KEN002DH 22.08.2019