Viesta VDI90230EG Manual Del Usuario página 5

Mounting of the V-FLAP:
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body.
The images only show an example of how to mount the V-flap,the outlet may be various according to
different models and configuration.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6
• a pin 3 should be top oriented;
• the axis 4 should be inserted in the holes 5 on body;
• repeat all the operations for the 2nd half-part
Installation:
If you have an outlet to the outside, your cooker hood can be connected
as shown below, by means of an extraction duct (enamel, aluminium, fle
xible pipe or not inflammable material with an interior diameter of 150mm).
1. Before installation, turn the unit off and unplug it from the outlet.
2. After confirm the installation height of the hood, and then, fix the installation hole for the hood, inside
chimney bracket and safety hole as per the hood size. Make the holes on the wall.
WALL MOUNTING INSTALLATION
[ EN ● 5 ]
Version: 2:0
KEN002DH 22.08.2019