Nemaxx SK05 Manual Del Usuario página 4

MONTAGE
Tools needed
Fig. 01
Step 1:
Drill the 6 holes in the wall Fig. 01 and push
the dowel 10x50 (H) into the holes Fig. 02.
EN
IMPORTANT
1. Tighten the screws, but not too tight.
Over-tightening can damage the screw,
which greatly impairs their holding power.
2. Make sure that the mounting screws are
anchored into the center of the anchor
safely.
The use of an edge locator is highly
recommended.
50mm
ø 10mm
4
Version: 5.0
05.07.2017
Fig. 02