Maintenance And Cleaning - Nemaxx FL10-VdS Manual Del Usuario

DO NOT INSTALL SMOKE ALARM DEVICES IN THE FOLLOWING PLACES
1 Near appliances or areas where normal combustion
Regularly occurs (kitchens, near furnaces, hot water heaters).
Use specialized smoke alarm device with unwanted alarm control for this areas.
2: In areas with high humidity, like bathrooms or areas near dishwashers or washing machines.
Install al least 10feet away from these areas.
3. Near air returns or heating and cooling supply vents.
Install at least 3 feet away from these areas.
The air could blow smoke away from the detector, interrupting its alarm.
4. In rooms where temperatures may fall below 0° or rise above 40°, or in humidity higher
than 93%. These conditions will reduce battery life or cause a fault alarm.
5. In extremely dusty, dirty, or insect – infested areas influence particles interfere with
smoke alarm device operation.

MAINTENANCE AND CLEANING

In addition to weekly testing, the alarm requires periodic cleaning to remove dust, dirt, and
debris
Clean the alarm at least once a month to remove dust, dirt, or debris.
Use a vacuum cleaner with the soft brush, vacuum all sides and covers of smoke alarm
device.
This alarm has a low battery monitor which will cause the alarm to "chirp" approx every
40 seconds and the red LED flash once at the same time for a minimum of thirty days
when the battery gets low.
If there is a defective battery or other failures, you can refer to "Trouble shooting" for
solution, if there are still failures during warranty, you can return to your retailer.
WARNING
The battery is sealed in cover and not replaceable.
Please replace another new alarm if the low battery chirp occurs.
IMPORTANT
Do not attempt to remove the cover to clean inside. This will affect warranty.
REPAIR
If the alarm is not operating properly, and is still under warranty, return it to the original place
you buy. Pack it in a well-padded carton, and ship to the original place you buy.
If the alarm is no longer under warranty, have a licensed electrician replace it immediately with
a comparable alarm.
CAUTION
Do not attempt to repair the alarm. It will affect your warranty.
EN
4
Version: 2.0
14.07.2016