Tascam Portscapture X8 Manual Del Usuario página 14

3.
Tap MIC or numbers 3 to 6 to turn the recording tracks
on/off.
Gain levels
Input
settings
Input on/off
status
Tracks shown with red backgrounds will be recorded.
Slide the track GAIN faders to adjust their input
4.
levels.
While watching the level meters, adjust the GAIN faders
until the highest that the meters reach is about −12 dB.
NOTE
If an input level exceeds –2 dB, the PEAK indicator on the
unit will light.
14
TASCAM Portacapture X8
Procedure 3: Set the mixer
1.
Tap MIXER at the bottom left of the screen to open the
MIXER screen.
2.
Slide the faders of each track to adjust the balance of
levels sent to the MASTER.
MASTER
LEVEL setting
PAN settings
Faders
p If the input level is too low the recorded sound will be
quiet, but if it is too high the sound will be distorted (or
break up).
Procedure 4: Start recording
1.
Press the REC [0] button to start recording.
When recording starts, the REC indicator will light.
2.
Press the HOME [8] button to stop recording.
MASTER
level
When recording stops, the REC indicator will become
unlit.