Service And Maintenance; Filter Change - IP Cleaning ISY C/ACC Manual De Instrucciones

filter (11) needs to be cleaned when
the suction performance decreases
and consequently
increases.
Filter cleaning
1. Turn the machine on.
2. Shut the airflow by closing the
hose end, unless you reach
maximum vacuum inside the
tank.
3. Push the filer cleaning button
(12) 4-5 times.
4. Open the airflow releasing the
hose end
3.3 Emptying of tank
Observe whether the tank needs to
be emptied by opening the buckles
(3) and remove the vacuum cleaner
head (1).
Emptying of tank
1. Find an appropriate waste bin
outside for disposal of the tank
2. Open the buckles (3)
3. Remove the hose
4. Take of the head (1) and put it
on the
appropriate feet.
5. Empty the tank (2) into the bin
6. Put the head (1) on the tank
(2) and tighten the buckles (3)

4. Service and maintenance

• Store the machine indoors and in a
dry environment.
• Clean the machine surface with a
dry cloth or a damp cloth with a
little cleaning agent.
• Order original accessories from a
local dealer.
motor noise
ground on the
• Service–contact your local dealer.
4.1 Recycling and scrapping
Recycle the wrapping and scrap the
machine
recommendations from the local
authorities. Cut the cord as short as
possible to avoid someone getting
injured on the scrapped machine.
4.2 Environmental commitment
This machine is designed with the
environment in mind. All plastic
parts due marked for recycling.
4.3 Responsibility
IP Cleaning disclaims all responsibility
for all damage caused by incorrect
use or modification of the machine.

4.4 Filter change

The filter can break and must be
replaced.
Filter (11)change:
1. Turn off the vacuum cleaner
2. Remove the plug from the
wall socket
3. Remove the head from the
tank
4. Position
down
5. Remove the 4 screws fixing
the filter frame to the head
27
EN
according
the head upside
to