Publicidad
© 2015 Hewlett-Packard Development Company, L.P.
www.hp.com
Regulatory Model Identification Number
For regulatory identification purposes, this product has been assigned
a Regulatory Model Number (RMN). The RMN for your product is
RSVLD-1501. The RMN should not be confused with the marketing name
(HP Jetdirect 2900nw Print Server) or the HP Product Number (J8031A).
Notice for the U.S.A.
This device complies with Part 15 of the Federal Communication
Commission rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at this own expense. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: The FCC requires the user to be notified that any changes
or modifications made to this device that are not expressly approved by
HP Company may void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received,including interference that may cause undesired operation.
Warning – Exposure to Radio Frequency Radiation Although the radiated
output power of this device isbelow the FCC radio exposure limits,
the device should be used in such a manner that the potential for
humancontact with the antennas during normal operation is minimized.
To avoid the possibility of exceeding theFCC radio frequency exposure
limits, human proximity to the antenna should not be less than 20 cm
(8 inches) during normal operation.
Notice for Canada
This device complies with the limits for a Class B digital device and
conforms to Industry Canada standard ICES-003. Products that contain a
radio transmitter comply with Industry Canada standard RSS210 and are
labeled with an IC ID.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with Canada radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and
personnel.
Note pour le Canada
Cet appareil numérique de la classeBest conforme à la norme ICES-003
d'Industry Canada. La radio sans fil de ce dispositif est conforme à la
certification RSS 210 d'Industry Canada et est étiquetée avec un numéro
d'approbation IC.
Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet
appareil ne doit pas provoquer d'interférences et (2) doit accepter toute
réception d'interférence, y compris les interférences susceptibles de
générer un fonctionnement indésirable de l'appareil.
Cet équipement respecte les limites d'exposition aux radiofréquences
canadiennes applicables dans un environnement non contrôlé. Cet
équipement doit être installé et fonctionner à une distance minimale
de 20 cm entre le radiateur et votre corps.
© 2015 Copyright HP Development Company, L.P.
Reproduction, adaptation or translation without prior written permis sion
is prohibited, except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the ex-
press warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
war ranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
La reproduction, l'adaptation ou la traduction de ce document sans
l'autorisation écrite préalable de Hewlett-Packard est interdite, sauf
dans des conditions conformes aux lois relatives au copyright.
Les informations contenues dans ce document peuvent être modifiées
sans préavis.
Les seules garanties pour les produits et services HP sont décrites dans
les déclarations de garantie expresse qui accompagnent ces produits et
services. Les informations contenues dans ce document ne constituent
en aucun cas une garantie supplémentaire. HP n'est pas responsable des
erreurs d'ordre technique ou éditorial ou des omissions contenues dans
ce document.
Publicidad
