Description; Input Connections And Audio Controls - Clarion XC6210 Manual De Instrucciones Y De Instalación

DESCRIPTION

The XC6210 and XC6410 use a PWM regulated power supply for superior sound
and output wattage. All of the connections and controls for the XC6210 and XC6410
are conveniently labeled and located on one side of the amplifier. To ensure the
best possible electrical connections, the power, speaker and RCA inputs are corro-
sion resistant. An additional benefit of the XC6410 is the ability to create a 2, 3, or
4 configuration. In the event of component failure or a short circuit, the XC6210 and
XC6410 incorporate protection circuits and ATC fuse protection to prevent damage to
the amplifier.

INPUT CONNECTIONS AND AUDIO CONTROLS

The front panel of the XC6410 and XC6210 contain both connections for RCA and
speaker level inputs, along with the audio controls as shown below.
Fig. 1
XC6410
13 14
9
1. CH1 RCA Input
2. CH2 RCA Input
3. CH3 RCA Input
4. CH4 RCA Input
5. CH1 Speaker Output
6. CH2 Speaker Output
7. CH3 Speaker Output
8. CH4 Speaker Output
9. 30 Amp ATC Fuse (Q'ty - 2)
10. +12VDC Input Battery
11. Remote Turn-on Input
XC6210_6410 manual 03_07_12.indd 3
All manuals and user guides at all-guides.com
15 16 17
1 3
10 11 12 2 4
25
18 19 20 21 22 23
5 6 7
12. Ground (Chassis Ground)
13. Output Mode Selector Switch
(STEREO/CH1 Bridged/CH1-2 MONO)
14. Output Mode Selector Switch
(ST/CH2 Bridged/CH3-4 MONO)
15. CH1/CH2 Input Gain Control
16. Input Select (2CH BB, 2CH, 4CH)
17. CH3/CH4 Input Gain Control
18. Auto Sense (Automatic Power
ON /OFF)
19. Bass Boost
24
8
3
XC6210/XC6410
3/8/2012 10:57:43 AM