-
Stereo
Note: This feature is only available for VCD play.
Display menu
In play mode, press the TITLE button to go back to
the title menu during PBC playback.
Select a camera angle
During play, press ANGLE button repeatedly to select
a camera angle.
Note:
This feature is only available for DVDs recorded with
multiple camera angles.
Picture view options
Preview pictures
1
During play, press the 3 button.
-
The thumbnails of 12 pictures are displayed.
2
Select one of the following:
-
a picture
-
the slide show option
-
the menu option
-
the next/previous page (if available)
3
Press the ENTER button to:
-
play the selected picture
-
start slide show of all pictures
-
enter the menu where each remote key
function is explained
-
turn to the next/previous page (if available)
Select a slide show play mode
During play, press the PROG buttons repeatedly
to select a slide-show play mode.
Rotate picture
During play, press the
picture anti-clockwise/clockwise.
Adjust settings
Introduction
This chapter describes how to use the SETUP menu.
Most settings and adjustments are required to be set
when you first use the system.
1
Press the SETUP button.
2
Press the
,
buttons to select a setup page .
3
Press the
,
buttons to select an option and then
press the
button.
4
Press the
,
buttons to select a setting and then
press the ENTER button .
-
To return to the previous menu, press the
button.
-
To exit the menu, press the SETUP button.
General Setup Page
TV DISPLAY
The shape of the television or monitor may not match
34
/
buttons to rotate the
the shape of the movie frame. To avoid distortion on
older televisions, you may need to change the way in
which the image is displayed. Televisions use a 4:3
aspect ratio; high-definition televisions use 16:9 as-
pect ratio (as do movies).
Note:
You may need to read your television's manual in
conjunction with this section in order to achieve the
best results. Some discs do not allow the aspect ratio
to be changed and you will therefore have to change
the aspect ratio on the TV.
Make this setting while playback is stopped; you cannot
do this while playing back a disc.
4:3 PANSCAN
This mode is used with 4:3 televisions. 4:3 images are
displayed normally. When showing 16:9 programmes,
the full height of the screen is displayed, and the left
and right part of the image are cut off.
4:3 LETTERBOX
This mode is used with 4:3 televisions. 4:3 images
are displayed normally. 16:9 images are visible at
their full width, but there are blank area at the top and
bottom of the screen.
16:9
Use with a 16:9 wide television.
Some wide-screen discs that do not permit the
Pan Scan mode playback are automatically played
in Letter Box mode.
Depending on the DVD, 4:3 Letter Box may be
selected automatically instead of 4:3 Pan Scan
and vice versa.
If 16:9 (Wide) is selected and a normal TV is
connected, 16:9 content will appear distorted
during playback (objects look thin).
OSD (On Screen Display) Language
Select the desired language for on screen menus of
the unit.
Screen Saver
On
The screen saver starts up if nothing is played back
and no operations are performed for 4 minutes.
Off
The screen saver does not start up.
Last Memory
On
Select this to make last memory function available.
Off
Select this to make last memory function invalid.
DVD Microsystem