Remote Control; Using The Stationary Air Conditioner - Dometic GROUP Waeco CoolAir RT880 Instrucciones De Uso

RT880/SP950
6.3

Remote control

The remote control is equipped with the following control elements for
operating the system:
No. in fig. 3,
Meaning
page 4
1 STANDBY button
The system can be switched between active and standby modes.
2 Temperature – button:
The temperature – button decreases the temperature by 1 °C or
the timer running time by 10 minutes.
3 Temperature + button:
The temperature + button increases the temperature by 1 °C or
the timer running time by 10 minutes.
4 Mode – button:
The operating mode – button switches to the next mode down.
5 Mode + button:
The operating mode + button switches to the next mode up.
7

Using the stationary air conditioner

NOTICE!
A
 The manufacturer assumes no liability for non-observance of
this operating manual, in particular for any consequential dam-
age, especially consequential damage caused by failure of the
stationary air conditioner.
 Do not insert foreign objects into the system.
7.1 Tip for improved use
NOTE
I
RT880 and SP950 are designed as air conditioning roof units for
relaxing rest periods. They can be used while driving, do not how-
ever replace the engine-powered vehicle air conditioning system.
Observe the following instructions for use to ensure your WAECO CoolAir
stationary air conditioner is used efficiently:
EN
All manuals and user guides at all-guides.com
Using the stationary air conditioner
31