Scott Living 1023VA-36-201 Instrucciones De Montaje, Cuidado Y Uso página 11

WALL MOUNT VANITY CABINET INSTALLATION INSTRUCTIONS
14. Locate Top (B) and set aside.
TIP: It may be easier to install faucet and
drain set (not included) to Top (B) at this
time.
With the help of another adult, apply a bead
of silicone adhesive (not included) to the top
edge of the Vanity Cabinet (A) and back side
of Top (B) where it rests against the wall.
Lower Top (B) onto Vanity Cabinet (A). Wipe
any excess silicone from both the outer and
inner edges of where the Top (B) rests on
the Vanity Cabinet (A). Allow silicone to dry
for 24 hours before use.
15. Locate upper and lower drawer (F) and set
aside. Fully extend upper drawer glide tracks.
With the help of another adult, hold the
extended glide in one hand and the drawer
in the other. Gently place the back of the
drawer box into the metal hook located on
the back of the drawer track. Once the glide
hook has been slid into the hole in the back
of the drawer box, gently lower the drawer
box down onto the extended glide tracks.
At the same time depress both of the glide
handles and allow the drawer box to fully
rest on the glide tracks. Test to see if the
drawer box is fully engaged. If the drawer
box can still be lifted off the glide track then
start again from the beginning. Never force
anything or else damage to the drawer or
glide hardware could result. Repeat for lower
drawer. The drawers location can be
adjusted slightly up or down by twisting
the adjuster knob next to the glide handles.
14
B
3
15
A
11
1
2
3
B
F