Scott Living 1023VA-36-201 Instrucciones De Montaje, Cuidado Y Uso página 9

WALL MOUNT VANITY CABINET INSTALLATION INSTRUCTIONS
Using hardware appropriate for your wall
10.
type (not included), secure the Wall Bracket
(G) to the wall into at least 2 wall studs. Use
hardware such as a lag bolt or toggle bolt
depending on your wall type. Make sure the
Mounting Bracket (G) is level and centered
well to the desired location of the Vanity
Cabinet (A). Be careful not to disturb any
electrical or water lines that may be
concealed in the wall.
!IMPORTANT SAFTEY STEP!
It is critical to have a strong secure
connection to the wall before continuing to
the next step.
11.
Locate Vanity Cabinet (A) and remove
both the upper and lower drawer (F). To
remove drawers (F), extend the drawer
fully out one by one and depress the
handles on both sides of the glides located
on the bottom front corners under the
drawer boxes. Both handles need to be
depressed in at the same time to release
the drawer box from the glides then gently
lift up drawer box from glide track. Repeat
for second drawer (F). Do not force the
drawer box out. Set drawers aside.
10
G
11
A
9
1
2
F
F