Bluetooth Pairing; Volume; Power Switch And Dc Input - IK Multimedia iLoud Micro Monitor Manual Del Usuario

English

Bluetooth pairing

The iLoud Micro Monitor uses Bluetooth
without the need to connect any audio cable. In order for your device to work with the iLoud Micro Monitor it
must first be paired. To pairing your device:
• Turn the back panel volume control counter-clockwise to the -INF position.
• With the iLoud Micro Monitor and your Bluetooth
panel of the Left speaker to make the speaker discoverable. The front panel indicator will slowly flash blue.
• In the settings of your Bluetooth
• From the Bluetooth
• iLoud Micro Monitor indicates that pairing is complete when the indicator returns steady white. You can now
stream audio from your device to the iLoud Micro Monitor: only when there's an audio streaming the LED
turns steady blue.
• With the volume control on your Bluetooth
Micro Monitor volume control until you have reached the desired level.

Volume

This potentiometer allows you to adjust the input level of the audio source.

Power switch and DC input

Power switch: this rocker-style switch allows to power on and off iLoud Micro Monitor.
DC IN: connect the (included) PSU to this DC socket.
IMPORTANT: before to connect/disconnect the DC input, make sure that the power switch is set to Off.
to stream high quality audio from your Bluetooth
®
device, set it to "discover" available devices.
®
device list, select the "iLoud Micro Monitor" device.
®
device powered on: press the PAIRING button on the rear
®
device turned up, play some music and slowly raise the iLoud
®
12
enabled device
®