Publicidad
Idiomas disponibles
Idiomas disponibles
Functional parts of your comBIND 500e
Mains cable/plug – Connect to a properly-
earthed mains socket.
save energy, always switch off the unit after use.
Blow-out fuse – Safeguard against electrical
malfunction. Only replace with same type and
rating.
Lid/paper stand
a paper stand to ease punching.
Adjustable paper stop – Set to the paper format
used: A4, US letter or A5.
Front slot for two-hole punching – Place
sheets here for standard two-hole punching.
sheets here to punch for binding with plastic
combs.
1
2
6
All manuals and user guides at all-guides.com
– Switch unit on and off. To
– Place
Unpacking and installing the unit
Unpacking / scope of supply
•
Carefully unpack the unit and inspect it for damage.
•
The packaging should contain the following items:
– the comBIND 500e,
– this operation manual.
•
Keep the packaging material at least until the guarantee has
expired.
2.
Installing and connecting the unit
•
Place the unit on a stable, level surface
outlet.
•
Connect the mains cable
•
•
Press the power switch
The punching dies were coated with protecting oil during manufacture.
•
Punch several sheets of scrap paper in order to clean the
punching dies.
The unit is now ready for operation.
Punching depth switch – Set to the comb
set, your sheets will turn with ease.
Punching button – Press to punch sheets placed
in the front or rear punching slots.
Binding mechanism – Opens and closes the
plastic combs with help of the binding lever
Comb size scale – Shows the comb size needed
for the amount of sheets to be bound.
the plastic comb inserted into the binding
mechanism
.
Cuttings tray – Empty regularly to avoid damage
to the motor and punching dies.
Warning! Risk of electrical shock. Do not connect to the mains
chassis, defective or wrong
voltage does not match the rating indicated on the type plate.
with the mains outlet in a way to avoid
to switch the unit on.
– Used to open and close
near a mains
.
.
Publicidad
Capítulos
Solución de problemas
