TOPDON ARTLINK 400 Manual Del Usuario página 5

5. Freeze Frame
This option takes the snapshot of the operating conditions when
an emission-related fault occurs.
6. O2 Sensor Test
This option retrieves O2 sensor monitor test results of the most
recently completed tests from your vehicle's computer.
7. On-Board Monitor Test
This option retrieves test results for emission-related powertrain
components and systems that are not continuously monitored. The
tests available are determined by the vehicle manufacturer.
8. EVAP System Test
This option retrieves test results for emission-related powertrain
components and systems that are not continuously monitored. The
tests available are determined by the vehicle manufacturer.
9. Vehicle Information
This option retrieves a list of information (provided by the vehicle
manufacturer) from the vehicle's computer.
This information may include:
• VIN (Vehicle identification Number).
• CID (Calibration ID).
• CVN (Calibration Verification Number).
Review
This option is designed to review or delete the recorded DTCs,
Data Streams and Freeze Frames.
DTC Lookup
This option enables you to view the detailed definition of the
retrieved DTCs.
7
Help
This option enables you to check the information of the scanner
and OBD.
Setup
This option enables you to change language, set the measurement
unit, turn on/off the recording function and key tone.
Note:
If you set the recording mode to OFF, the Review function will be
unavailable and the DTCs, Data Streams, and Freeze Frames will
not be stored after every test.
Specifications
Display
Input Voltage
Working Temperature
Storage Temperature
Dimensions 147.5*79*24.3 mm (5.8*3.1*1.0 inches)
Weight
2.4''
9~18V
-10°C~50°C (14°F~122°F)
-20°C~70°C (-4°F~158°F)
230g (8.11oz)
8