Transportation, Storage And Disposal - Sordin SHARE-1 Manual Del Usuario

MAINTENANCE
WARNING:
Do not wash or put fully into water.
Clean the product regularly. Use a cloth with water and soap and dry them carefully.
Check the condition of the sealing rings and the foam rubber inserts before each use. Replace the sealing
rings and the foam rubber inserts 1 time each 6 months or more frequently if it is necessary. Use original
spare parts (Fig. 8 and Table 3). Visit www.sordin.com for ordering information.

TRANSPORTATION, STORAGE AND DISPOSAL

Transportation and storage
When the hearing protector is not in use,
• Always store in a dry and clean place at normal room temperature between each usage to let it dry
out completely.
• Do not place in direct sunlight.
• Make sure that the sealing rings are not compressed.
• Make sure that the headband is not stretched (Sordin SHARE-1).
• When the helmet is not in use, put the earmuffs in operating position.
Items above also applies for transportation of the hearing protector. No additional protection is needed.
NOTICE! If the hearing protector is stored for a prolonged period, charge every 4 weeks to maintain the
battery.
NOTICE! Do not press the cups onto the helmet shell as this will lock the spring in the earmuff arm, and
damage the attach ment slots on the side of the helmet (Sordin SHARE-2) (Fig. 1).
Disposal
Follow national regulations for disposal of product.
ACCESSORIES
Approved sizes (Sordin SHARE-1 variants)
Over-the-head earmuff size ranges (Sordin SHARE-1): Small-Medium-Large.
Approved helmets (Sordin SHARE-2 variants)
These earmuffs shall be fitted to, and used only with, the industrial safety helmets as listed in Table 2.
Adapter type number is marked on the adapter. For an updated list of approved helmet combinations,
visit www.sordin.com.
WARNING:
Helmet mounted hearing protectors complying with EN 352-3 are of 'medium size
range' or 'small size range' or 'large size range'. 'Medium size range' helmet mounted hearing protectors
will fit the majority of wearers. 'Small size range' or 'large size range' helmet mounted hearing protectors
are designed to fit wearers for whom 'medium size range' helmet mounted earmuffs are not suitable.
10