Blyss DCCX1LU-1600 Inicio Rápido página 11

without fan and 15 minutes with fan), then press the OK-boost button to
validate the selection; the remaining time in Boost is displayed.
. In Programme mode, Boost can be stopped at any time by pressing and
holding for 3 seconds on the OK-boost twice in a row. Following a manual
stop in Programme mode, Boost can only be reactivated by a programme
after a period of 2 hours.
PRECAUTIONS FOR USE
SETTING THE TEMPERATURE
- The heating power is maximal as long as the setpoint temperature has
not been reached. Programming the setpoint temperature to the maximum
temperature possible, will not heat the room quicker.
- Wait several hours for the room temperature to stabilise before adjusting
the temperature setting.
MAINTENANCE:
- IMPORTANT: do not operate the fan without its air filter.
- Regularly clean the air inlet and outlet vents as soon as they begin to clog.
POWER CUTS
- Following a power cut, the appliance will automatically restart with all of the
settings and programs used before the cut (if it was in operation before the
cut, it will stay on after the cut).
- The programmer clock starts from the time the cut began. This means that
the time and day could be misaligned.
- Following a power cut, the reference, then the total time the appliance is
turned on is displayed for 30 seconds on power up.
11
Quick start