Transport, Packaging And Storage; Transport; Packaging And Storage - WIKA 232.50.100 Manual De Instrucciones

5. Transport, packaging and storage

5. Transport, packaging and storage

5.1 Transport

EN
Check the instrument for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property
can occur.
▶
▶
Shocks can cause small bubbles to form in the fill fluid of
filled instruments. This has no effect on the function of the
instrument.

5.2 Packaging and storage

Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during trans-
port (e.g. change in installation site, sending for repair).
Permissible storage temperature
Model 2, PG23CP, PG28:
„
Model PG23LT:
„
1) Option for model PG28
22
When unloading packed goods upon delivery as well as
during internal transport, proceed carefully and observe
the symbols on the packaging.
With internal transport, observe the instructions in chapter
4.2 "Packaging and storage".
WIKA operating instructions pressure gauge, model 2 per ATEX
-40 ... +70 °C
-70 ... +70 °C
1)