Functions - PRESIDENT MC KINLEY USA 12/24 V Manual Del Usuario

TOT (Time Out Timer)
If the transmission (using the PTT (13) key or VOX) is more
than 5 minutes, CHANNEL and
mission ends.
The time-out tone will sound until the PTT key is released.
C) FUNCTIONS
Push the CH knob (6) to alternate between 7 functions.
SET A FUNCTION, turn the CH rotary knob (6).
To
Push the CH knob (6) to
the following function.
Message shows the name of the function.
Press PTT switch (13) to
COLOR
Push CH knob (6) one time. Message shows {COLOR}.
-
Turn CH rotary knob (6) to alternate between 3 colors:
-
- Push CH knob (6) to validate the COLOR setting and acti-
vate the next function (DIMMER).
Press PTT switch (13) to exit
-
DIMMER
DIMMER function allows adjusting the brightness of the
lighting. 10 steps from 0 to 9.
Push CH knob (6) two times. Message shows {DIMMER}.
-
- Turn CH rotary knob (6) to adjust then DIMMER value.
- Push CH knob (6) to validate the DIMMER setting and ac-
start blinking, the trans-
VALIDATE SETTING
and activate

FUNCTIONS

mode.
FUNCTIONS
mode.
tivate the next function (CONTRAST).
Press PTT switch (13) to exit
-
CONTRAST
CONTRAST function allows adjusting the contrast of the
display. 10 steps from 0 to 9.
- Push CH knob (6) three times. Message shows {CONTRAST}.
- Turn CH rotary knob (6) to adjust the CONTRAST value.
Push CH knob (6) to validate the CONTRAST setting and
-
activate the next function (KEY BEEP).
- Press PTT switch (13) to exit
KEY BEEP
Beep on changing the channel, keys etc...
- Push CH knob (6) four times. Message shows {KEY BEEP}.
Turn CH rotary knob (6) to set KEY BEEP function on/of. "BP"
-
is displayed when the function is on.
- Push CH knob (6) to validate the KEY BEEP setting and
activate the next function (ROGER BEEP).
Press PTT switch (13) to exit
-
ROGER BEEP
Push CH knob (6) five times. Message shows {ROGER BP}.
-
Turn CH rotary knob (6) to set ROGER BEEP function on/of.
-
" " is displayed (in CB
- Push CH knob (6) to validate the ROGER BEEP setting and
activate the next function (SWR).
Press PTT switch (13) to exit
-
The Roger Beep sounds when the PTT switch (13) of the micro-
phone is released in order to let your correspondent speak.
Historically as CB is a "simplex" communication mode, it is
not possible to speak and listen at the same time (as it is the
case with a telephone). Once the conversation was over,
he said "Roger" in order to prevent his correspondent that
13
FUNCTIONS
mode.
FUNCTIONS mode.
FUNCTIONS
mode.
mode only) when the function is on.
FUNCTIONS
mode.